Remove/install D-pillar trim

AR68.30-P-4497MFX

Remove/install D-pillar trim

05.12.2019

Model

247.6

Shown on model 247.6 with code 847 (third row of seats)

1

D-pillar paneling

2

Guide

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove corresponding rear seat of the third row of seats.

Model 247.6
with code 847 (3rd seat row)

AR91.12-P-0007MFX

2

Remove seat belt end fitting on the third row of seats.

Model 247.6
with code 847 (3rd seat row)

 Screw/nut, seat belt end fitting/rear seat belt buckle to body

*BA91.40-P-1006-01X

3

Remove trim sideways at the top in the trunk.

AR68.30-P-4805MFX

4

Remove edge guard in the working area.

 Installation: Ensure that the edge guard is seated correctly in the working area.

5

Unclip D-pillar trim (1).

 Dismantling tool

*000589956300

6

Extend D-pillar trim (1) out of the roof lining and out of the guide (2).


Carefully extend D-pillar trim (1).
Otherwise the roof lining will be damaged.

 Installation: Ensure that the position of the guide (2) is correct.

7

Remove seat belt through the seat belt outlet cover on the D-pillar trim (1).

Model 247.6
with code 847 (3rd seat row)

8

Remove D-pillar trim (1).

9

Install in the reverse order.

 Seat belts/emergency tensioning retractors

Number

Designation

Model 247

BA91.40-P-1006-01X

Screw/nut, seat belt end fitting/rear seat belt buckle to body

Nm

35