Remove/install D-pillar trim

AR68.30-P-4497MEX

Remove/install D-pillar trim

20.05.2019

Model

167.9

except code M036 (Maybach version)

Shown on right side of vehicle

1

Trim Panels

4

Screw

2

Bolts

5

Belt end fitting

3

Seat cushion

Shown on left side of vehicle

6

Seat belt

7

Cargo area paneling

8

D-pillar paneling

9

Edge guard

10

Cover

11

Hook

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Fold up seat backrest of third seat row.

2

Remove trims (1).

3

Remove screw/bolts (2) .

 Screw, seat frame base for 3rd seat row to body

*BA91.12-P-1016-03M

4

Fold up seat cushion (3) and fix in place.

5

Unscrew bolt (4).

 Screw, seat belt end fitting/seat belt buckle of 3rd seat row to body

*BA91.40-P-1014-01U

6

Guide out seat belt end fitting (5) with seat belt (6) between load compartment trim (7) and seat towards front.

7

Release load compartment trim (7) in area of D-pillar trim (8).

AR68.30-P-1185MEX

8

Release edge guard (9) in area of D-pillar trim (8).

9

Remove cover (10).

10

Unclip D-pillar trim (8) (arrows) and remove towards rear.

 Installation: Ensure hook (11) is correctly seated at top in side wall.

 Long wedge

*115589035900

11

Guide seat belt (6) through opening in D-pillar trim (8) and remove D-pillar trim (8).

12

Install in the reverse order.

 Rear seats

Number

Designation

Model 167

BA91.12-P-1016-03M

Screw, seat frame base for 3rd seat row to body

M10

Nm

50

 Seat belts/emergency tensioning retractors

Number

Designation

Model 167

BA91.40-P-1014-01U

Screw, seat belt end fitting/seat belt buckle of 3rd seat row to body

Nm

35