ar6830p4497lwt

Remove/install D-pillar trim

Type ar · topic 68.30 · version 0200 · 2016-12-02

Applies to: Model 213.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 213 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 213 (models 2**)

AR68.30-P-4497LWT

Remove/install D-pillar trim

23.11.2016

Model

213.2

Modification notes

04.11.2016

Operation incorporated

Step 4

Remove/install D-pillar trim

P68.30-3925-09

1

D-pillar paneling

3

Electrical connector

2

Load compartment cover guide rail

4

Edge guard

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on sensor system for trunk lid opening/closing

Model 213.2
with code P17 (KEYLESS-GO package)

AH80.61-P-0001-01A

Remove/install

1

Remove left or right load compartment cover guide rail (2)

AR68.30-P-1100LWT

2

Detach edge guard (4) in area of D-pillar paneling (1)

3

Disconnect electrical connection (3)

4

Unclip D-pillar paneling (1)

5

Remove D-pillar paneling (1) in direction of arrow and remove

6

Install in the reverse order

Referenced documents