Remove/install C-pillar trim sections

AR68.30-P-4491MFA

Remove/install C-pillar trim sections

10.01.2018

Model

177.0

1

C-pillar paneling

3

Luggage compartment lamp

2

Cover

6

Cover

4

Retaining clips

5

Retaining clips

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Move driver's seat or front passenger seat forward

2

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

3

Fold forward left or right rear seat

4

Remove rear shelf

5

Remove edge guard in working area of left or right rear door and trunk

 Installation: Ensure that edge guard is correctly seated.

6

Unclip cover (2)

7

Unclip trunk lamp (3) and release and disconnect electrical connector

8

Unclip and remove C-pillar trim (1)

 Installation: Ensure that retaining clips (4) and fixing clips (5) correctly engage.

 Installation: Slide trim (6) under C-pillar trim (1).

 Long wedge

*115589035900

9

Install in the reverse order