ar6830p4490f

Remove/install trim at C-pillar

Type ar · topic 68.30 · version 0106 · 2009-12-08

Applies to: MODEL 210.0## ## up to 111290

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 210 (models 0**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 210 (models 0**)

AR68.30-P-4490F

Remove/install trim at C-pillar

25.11.09

MODEL 210.0## ## up to 111290

Remove/install trim at C-pillar

P68.30-0246-09

1 Paneling (C-pillar)

2 Insert clips

3 Retaining clamp

4 Tabs

5 Screw

6 Belt end fitting

7 Wheel well paneling

Remove/install

1

Detach edge guard in area of paneling (1 and 7)

2

Remove grab handle

3

Remove paneling (7)

4

Press paneling (1) out of insert clips (2) with long wedge

*115589035900

5

Press paneling (1) out of retaining clips (3) and pull tabs (4) out of rear shelf toward front.

To completely remove paneling (1):

Remove rear seat cushion

AR91.12-P-1700F

6

Remove screw (5) from belt end fitting (6) of rear seatbelt and pull belt out of paneling (1)

*BA91.40-P-1001-01A

7

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Model
202, 208.3

Model
210

BA91.40-P-1001-01A

Screw on belt end fitting

Nm

35

35

Remove/install trim at C-pillar

Special tools

115 589 03 59 00

Long wedge

Referenced documents