ar6830p4490es

Remove/install trim at C-pillar

Type ar · topic 68.30 · version 0100 · 2009-07-29

Applies to: MODEL 212.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 212 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 212 (models 2**)

AR68.30-P-4490ES

Remove/install trim at C-pillar

21.7.09

MODEL 212.2

Remove/install trim at C-pillar

P68.30-3509-06

Shown on right side of vehicle

1 C-pillar paneling

2 Seat belt height adjustment mechanism

3 Edge guard

4 Seat belt

5 Belt end fitting

6 Clips

7 Cutout

8 Supports

9 Fixing

Remove/install

1

Remove rear seat cushion

AR91.12-P-1020CW

2

Remove belt end fitting (5)

*BA91.40-P-1014-01Q

3

Remove upper side load compartment paneling

AR68.30-P-1180ES

4

Loosen edge guard (3) in area of C-pillar paneling (1)

5

Loosen C-pillar paneling (1) from clips (6)

Mounting wedge

*110589035900

Installation: Ensure that supports (8) are seated correctly in clips (6).

6

Remove C-pillar paneling (1) and install seat belt (4)

Installation: Insert fastener (9) into cutout (7), align belt height adjustment (2) according to seat belt guide bracket.

7

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Model
212.2

BA91.40-P-1014-01Q

Bolt at rear belt end fitting

Nm

35

Remove/install trim at C-pillar

Mounting wedge

110 589 03 59 00

Referenced documents