ar6830p4470a

Removing and installing rear roof frame cover

Type ar · topic 68.30 · version 0101 · 2000-06-27

Applies to: MODELS 202.07 /08 /18, 210.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 202 (models 07*, 08*, 18*) · Series 210 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.32 Roof lining — Series 202 (models 07*, 08*, 18*) · Series 210 (models 2**)

AR68.30-P-4470A

Removing and installing rear roof frame cover

14.9.95

MODELS 202.07 /08 /18, 210.2

Removing and installing rear roof frame cover

P68.30-0270-06

Model 202

1 Center roof frame covering

2 Side roof frame covering

3 Mount for double sun shade

4 Rear courtesy light

Removing and installing rear roof frame cover

P68.30-0303-06

Model 210

1 Center roof frame covering

2 Side roof frame covering

3 Mount for double sun shade

4 Rear courtesy light

Removing, installing

1

Remove paneling on C-pillar

Model 202

AR68.30-P-4490EA

Model 210

AR68.30-P-4490FA

2

Remove mount for double sun shade (3)

3

Unclip side roof frame cover (2) and pull out downward

4

Pull out rear lamp (4) downward

5

Unclip center roof frame cover (1) downward and pull out toward front

6

Install in the reverse order

Installation: Model 210.2 with folding bench storage compartment, opposite the direction of motion (Code 844)

When replacing the roof frame trim openings must be made at the rear for the belt deflectors. Refer to:

Stamping opening in trim of rear roof frame

Without windowbag (code 290)

AN68.30-P-4470-01FA

Make opening in trim of rear roof frame

With windowbag (code 290)

AN68.30-P-4470-02FA

Referenced documents