ar6830p4400lf

Remove/install eyeglass compartment on roof

Type ar · topic 68.30 · version 0104 · 2017-09-06

Applies to: Model 217.3, 222

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 217 (models 3**) · Series 222

EinPAS 37 Interior equipment › 37.55 Stowage/container/holder › 37.55.40 Luggage shelf/stowage compartment/stowage compartment/container — Series 217 (models 3**) · Series 222

AR68.30-P-4400LF

Remove/install eyeglass compartment on roof

21.08.2017

Model

217.3, 222

Remove/install eyeglass compartment on roof

1

Overhead control panel control unit

2

Eyeglass compartment

3

Spring clip

4

Retaining pin

5

Shock absorber

P68.30-3840-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove

1

Remove overhead control panel control unit (1)

AR82.20-P-1000LF

2

Open eyeglasses compartment (2)

3

Push eyeglasses compartment (2) to side and unclip at opposite side

4

Unclip damper (5) from inside toward outside

Install

5

Insert spring clips (3) on eyeglasses compartment (2) into present groove

6

Insert eyeglasses compartment (2) at one side and clip in on opposite side

Position eyeglasses compartment (2) vertically so that spring clips (3) are positioned on front of retaining pins (4).

7

Check whether spring clips (3) are seated correctly after installing eyeglasses compartment (2)


The spring clips (3) should be seated in front of the retaining pins (4).
Otherwise the eyeglasses compartment (2) cannot be opened.

In the case of complaints.

Press spring clips (3) toward front of retaining pins (4) using screwdriver.

8

Close eyeglasses compartment (2)

9

Clip in damper (5) from outside toward inside

10

Install overhead control panel control unit (1)

AR82.20-P-1000LF

Check

11

Check glasses compartment (2) for proper operation by opening and closing

Perform test procedure at least three times.

Referenced documents