ar6830p430504tx

Install wiring harness for rear dome lamp in headliner

Type ar · topic 68.30 · version 0101 · 2010-03-29

Applies to: MODEL 219.3

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 219 (models 3**)

EinPAS 30 Lighting system › 30.20 Interior illumination › 30.20.12 Sensor/switch/wiring harness — Series 219 (models 3**)

AR68.30-P-4305-04TX

Install wiring harness for rear dome lamp in headliner

Repair materials

Number

Designation

Order number

BR00.45-Z-1071-02A

Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm

A 001 989 17 85

Install wiring harness for rear dome lamp in headliner

P68.30-3068-06

Shown with code (414) Electric glass tilting/sliding roof

1 Lay dome lamp wiring harness (1) on headliner (2)

Observe marking "UP" at dome lamp wiring harness (1).

2 Route dome lamp wiring harness (1) according to routing of old headliner (2) without kinks and glue to new headliner (2) with adhesive tape (3).

Press on adhesive tape (3) firmly, otherwise the adhesive tape (3) can detach itself from the headliner (2).