Remove/install paneling on upper windshield

AR68.30-P-4250GR

Remove/install paneling on upper windshield

22.03.2019

Model

463.202

up to model year 2013

Model

463.250/254/303/306/309

up to model year 2013

1

Lock lever

2

Cover

3

Cover

12

Inside rearview mirror retaining plate

13

Bolts

14

Light sensor connector

A

Side paneling

B

Sensor cover

B25

Hands-free system microphone

B38

Rain sensor

 

Remove/install

1

Open soft top

 See owner's manual.

2

Remove side grab handle

AR68.30-P-4301-01G

3

Remove side trim (A)

 Remove only on one side.
Carefully pull off top rubber seal in area of trim.
Installation:Glue top rubber seal back on.

Adhesive/Dekalin 3649

*BR00.45-Z-1003-02A

4

Remove rubber door seal

 Pull off only in area of side trim (A).

5

Remove overhead control panel control unit

AR82.20-P-1000GM

6

Remove inside rearview mirror

AR68.40-P-0001GM

7

Remove sensor cover (B)

8

Remove light sensor connector (14)

9

Pull connector off rain sensor (B38)

10

Remove inside rearview mirror retaining plate (12)

 Remove bolts (13).

11

Remove sun visor

AR68.60-P-5480G

12

Lever out hands-free system microphone (B25)

Code EL2 voice control for telephone (Linguatronic) – English, code EL3 voice control for telephone (Linguatronic) – French, code EL4 voice control for telephone (Linguatronic) – Italian, code EL5 voice control for telephone (Linguatronic) – Spanish,


Carefully remove barb.
Risk of breakage

 For code EL1 voice control for telephone (Linguatronic) – German

 Installation: Lug must be positioned in groove of trim.

 Long wedge

*115589035900

13

Disconnect connector of hands-free system microphone (B25)

Code EL2 voice control for telephone (Linguatronic) – English, code EL3 voice control for telephone (Linguatronic) – French, code EL4 voice control for telephone (Linguatronic) – Italian, code EL5 voice control for telephone (Linguatronic) – Spanish,

 For code EL1 voice control for telephone (Linguatronic) – German

14

Remove latch lever (1)

 Position latch lever (1) vertically, unclip cover, and unscrew latch lever (1).

15

Remove cover (2) at top of trim (3)

16

Remove trim (3) from wind deflector

17

Remove trim (3)

 Pay attention to cable connectors at respective ducts.

18

Install in the reverse order

19

Carry out function check

Repair materials

Number

Designation

Order number

BR00.45-Z-1003-02A

Adhesive/Dekalin 3649

A 000 989 82 71