Remove/install door sill molding

AR68.30-P-4100XG

Remove/install door sill molding

14.03.2018

Model

463

as of model year 2019

Shown on front left side of vehicle

1

Front door sill molding

3

Retaining clamp

2

Retaining clamp

4

Retaining clamp

Shown on left side of vehicle

3

Retaining clamp

5

Rear door sill molding

4

Retaining clamp

 

Remove/install

1

Unclip front door sill (1) from the retaining clamps (2, 3, 4) starting at the rear working forward.

 Long wedge

*115589035900

If the retaining clamps (2, 3, 4) are damaged,



Replace respective retaining clamps (2, 3, 4).

2

Disconnect the electrical connector.

If installed.

3

Remove front door sill (1).

4

Unclip rear door sill (5) from the retaining clamps (3, 4) starting at the front working toward the rear.

 Long wedge

*115589035900

If the retaining clamps (3, 4) are damaged,



Replace respective retaining clamps (3, 4).

5

Disconnect the electrical connector.

If installed.

6

Remove rear door sill (5).

7

Install in reverse order.