ar6830p4100sxs

Remove/install door sill molding

Type ar · topic 68.30 · version 0100 · 2006-10-23

Applies to: MODEL 221.1 with CODE (Z07) Top protection

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 221 (models 1**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.37 Footwell trim — Series 221 (models 1**)

AR68.30-P-4100SXS

Remove/install door sill molding

19.9.06

MODEL 221.1 with CODE (Z07) Top protection

Remove/install door sill molding

P68.30-3287-06

1 Front door sill molding

2 Rear door sill molding

3 Clips

Removal

1

Slide a door trim release lever from the rear (arrows) under the front door sill molding (1) or rear door sill molding (2) up to the first clip (3) to be released, turn release lever 90° to the outside and unclip clip (3) by pressing release lever downward

Make sure to insert door trim release lever from the rear (arrows) under the front door sill molding (1) or rear door sill molding (2), otherwise, the chrome strip can be damaged.

2

Insert door trim release lever up to other clips (3) for front door sill molding (1) or rear door sill molding (2) and unclip clips (3), by pressing release lever down

3

Pull front door sill molding (1) or rear door sill molding (2) upward from rear (arrows) and lift out of retaining clip

4

Check clips (3), replace if necessary

Installation

5

First insert front door sill molding (1) or rear door sill molding (2) into retaining clip and then clip in toward rear