P68.30-2443-06
1 Door sill molding
2 Outer side longitudinal member
3 Clip
4 Bow
| Before opening and closing the center door open front and rear door. Center door should be pushed closed | ||
| Protect interior equipment and floor covering against dirt and damage | ||
| Remove | ||
1 | Open front, rear and center door | ||
2 | Unclip door sill molding (1) out of side outer longitudinal member (2) in direction of arrow with assembly wedge | Assembly wedge | |
| Inspect | ||
3 | Check clips (3) for damage | Replace defective clips (3). | |
| Install | ||
4 | Position door sill molding (1) on side outer longitudinal member (2) and align clips (3) with holes in side outer longitudinal member (2). | When installing new door sill molding (1) remove center bracket (4) with suitable tool. A recess is provided for it in the side outer longitudinal member (2). | |
5 | Clip door sill molding (1) into, side outer longitudinal member (2) | The brackets (4) should move into the rectangular recesses in the side outer longitudinal member (2). | |
6 | Close, center, front and rear door |
Assembly wedge
110 589 03 59 00