ar6830p4100ha

Remove/install door sill molding

Type ar · topic 68.30 · version 0102 · 2019-03-25

Applies to: Model 240.0 Door sill of rear door

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 240 (models 0**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.37 Footwell trim — Series 240 (models 0**)

AR68.30-P-4100HA

Remove/install door sill molding

08.03.2019

Model

240.0

Door sill of rear door

Remove/install door sill molding

1

Door sill

2

Cover

3

Retaining clips

4

Edge guard

5

Bolts

6

Retaining clips

P68.30-2604-06

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove the door sill (1) with the assembly wedge

Place the assembly wedge directly on the retaining clips (3).

Installation: Insert the door sill (1) into the retaining clips (3) first of all, then press it down evenly.
The door sill (1) must be flush with the rear end of the blind (2).

Mounting wedge

*110589035900

2

Remove edge guard (4) in area of blind (2)

3

Unscrew the screws (5) and push the blind (2) down carefully with the assembly wedge

Move the assembly wedge directly towards the retaining clips (6).

Mounting wedge

*110589035900

4

Install in the reverse order

Remove/install door sill molding

110 589 03 59 00

Mounting wedge

Referenced documents