P68.30-0595-06
Illustrated on model 168
1 Door sill molding
2 Removal pliers
| Remove | ||
| The door sill molding (1) is arrested with the cable duct and can only be removed with removal pliers (special tool) without damage. | ||
1 | Open both doors and move front seat toward rear. | ||
2 | Insert removal pliers (2) from front into door sill molding (1) next to arrests (arrows). The catch positions (arrows) can be felt with the removal pliers (2) | Model 168: 5 catches in area of front door, 3 catches in area of rear door. Model 414: 6 catches in area of front door | |
3 | Pull inner leg of pliers back toward center of vehicle (arrow) approx. 3 mm. | ||
4 | Tilt removal pliers (2) outward at top, press together at bottom with other hand and hold (arrows). | ||
5 | Actuate removal pliers (2), thereby audibly unclip catch together with wiring duct. | ||
6 | Remove door sill molding (1) from wiring duct upward and to front | ||
| Install | ||
7 | Position door sill molding (1) over wiring duct and connect with arrest in wiring duct by pressing on |
Removal pliers
168 589 00 68 00