ar6830p4100fg

Remove/install door sill molding

Type ar · topic 68.30 · version 0100 · 2005-05-02

Applies to: MODEL 454.0 with CODE (I54) Door sill molding (DFO)

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.37 Footwell trim — Series 454 (models 0**)

AR68.30-P-4100FG

Remove/install door sill molding

14.2.05

MODEL 454.0 with CODE (I54) Door sill molding (DFO)

Remove/install door sill molding

P68.30-3165-08

1 Door sill molding

b Dimension

a Dimension

Remove

1

Remove door sill molding (1) from longitudinal member outer shell

Install

2

Clean longitudinal member outer shell in area of door sill molding (1) with suitable agents.

3

Place door sill molding (1) on longitudinal member outer shell and align according to dimensions (a, b)

Dimension (a) is 133 mm and dimension (b) 13.4 mm.

4

Mark position of door sill molding (1) with suitable adhesive tape on longitudinal member outer shell

5

Remove protective foil of adhesive strips from door sill molding (1) and place door sill molding (1) on longitudinal member outer shell according to markings installed and press in firmly