ar6830p4050tx

Remove/install paneling on A-pillar

Type ar · topic 68.30 · version 0100 · 2004-09-06

Applies to: MODEL 219.3 Upper A-pillar paneling

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 219 (models 3**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 219 (models 3**)

AR68.30-P-4050TX

Remove/install paneling on A-pillar

3.8.04

MODEL 219.3
Upper A-pillar paneling

Remove/install paneling on A-pillar
Remove/install paneling on A-pillar
Remove/install paneling on A-pillar

P68.30-3036-01

P68.30-3037-01

P68.30-3038-01

1 Edge guard

3 Retaining clamp

2 A-pillar paneling

Remove/Install

1

Press edge guard (1) to side in area of
A-pillar paneling (2)

Installation: Position edge guard (1) on A-pillar paneling (2) with mounting wedge.

*110589035900

2

Pivot A-pillar paneling (2) to windshield in direction of inside rearview mirror in upper area

Installation: Check whether retaining clips (3) are seated correctly.

3

Remove A-pillar paneling (2) out of instrument panel guide upward

4

Install in the reverse order

Remove/install paneling on A-pillar

Mounting wedge

110 589 03 59 00