ar6830p4050t

Remove/install paneling on A-pillar

Type ar · topic 68.30 · version 0103 · 2006-08-08

Applies to: MODEL 211.0 /2 /6 Paneling on upper A-pillar

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 211 (models 0**, 2**, 6**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 211 (models 0**, 2**, 6**)

AR68.30-P-4050T

Remove/install paneling on A-pillar

25.7.06

MODEL 211.0 /2 /6
Paneling on upper A-pillar

Remove/install paneling on A-pillar
Remove/install paneling on A-pillar

P68.30-2478-01

Shown on model 211.0 with code (290) Windowbag

1 Edge guard

2 A-pillar paneling

P68.30-2479-01

Remove/install

Note on function reliability of windowbag

AH91.60-P-0693-01A

1

Remove edge guard (1) in area of A-pillar paneling (2)

2

Press A-pillar paneling (2) off of A-pillar

Move assembly wedge directly to each clip (arrows) and press off.

*110589035900

Installation: Check whether clips (arrows) are seated tightly.

3

Remove A-pillar paneling (2) out of instrument panel guide upward

4

Install in the reverse order

Remove/install paneling on A-pillar

Wedge tool

110 589 03 59 00

Referenced documents