Remove/install paneling on A-pillar · ar6830p4050sg · Mercedes-Benz WIS

AR68.30-P-4050SG

Remove/install paneling on A-pillar

27.2.12

MODEL 461
mit Schutzkit

MODEL 461
with CODE (ZS4) Special protection version FB4
with CODE (ZS6) Special protection version FB6
with CODE (ZS7) Special protection version FB7

P68.30-3110-06

1 A-pillar paneling

2 Velcro fastener

3 Splinter protection with steel cover

4 Screw

5 Door entrance paneling

 	Remove/install
1	Remove door entrance paneling (5)	 The door entrance paneling (5) is additionally fastened with velcro strip.
		 Installation: Check velcro fastener, replace if necessary.	*BR00.45-Z-1084-02A
2	Remove bolts covers from A-pillar paneling (1)
3	Remove A-pillar paneling (1)	The A-pillar paneling (1) is fastened additionally with a velcro fastener (2).
		 Installation: The A-pillar paneling (1) should be seated correctly in the rubber seal. Check velcro fastener (2); replace if required.	*BR00.45-Z-1084-02A
4	Remove bolts (4)	 Installation: If present, use new micro-encapsulated bolts. If necessary, secure bolts (4) with Loctite 243.
			*BA68.30-P-1001-01B
		Loctite 243	*BR00.45-Z-1133-02A
5	Remove splinter protection with steel cover (3) from A-pillar.
6	Install in the reverse order

 Trim panels, ornamental frames

Number	Designation		Model 461.331 with protection kit	Model 461.332/333/334 with code ZS4 or code ZS6 or code ZS7


BA68.30-P-1001-01B	Screw, holding splinter guard to A-pillar	Nm	15	15

Auxiliary repair materials

Number	Designation	Order number
BR00.45-Z-1084-02A	Self-adhesive velcro fastener	ACS Armoured Car Systems GmbH Industriestr. 13 86551 Aichach Germany Tel. +49-8251-8926-0 Fax +49-8251-8926-40 www.acs-armcar.com
BR00.45-Z-1133-02A	Loctite 243	A 613 989 09 71