ar6830p4050k

Removing and installing paneling on A-pillar

Type ar · topic 68.30 · version 0102 · 2001-07-17

Applies to: MODEL 208.3 /4

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 208 (models 3**, 4**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 208 (models 3**, 4**)

AR68.30-P-4050K

Removing and installing paneling on A-pillar

12.2.97

MODEL 208.3 /4

Removing and installing paneling on A-pillar

P68.30-0451-04

Shown on Model 208.3

1 Paneling

2 Clips

3 Sheet metal clips

Removal, installation

1.1

Remove paneling on B-pillar

Only on model 208.3

AR68.30-P-4700K

1.2

Remove paneling from upper windshield

Only on model 208.4

AR68.30-P-4250KA

2

Unclip paneling (1) toward center and pull off

3

Pull paneling (1) out of sheet metal clips (3) in area of A-pillar

4

Remove paneling (1) to rear

When installing check clips and sheet metal clips, replace damaged clips.

Installation: Install paneling (1) into instrument panel with catch lugs.

Lift door edge guard over paneling (1).

5

Install in the reverse order

Referenced documents