ar6830p4050g

Removing and installing paneling on A-pillar

Type ar · topic 68.30 · version 0100 · 1997-04-24

Applies to: MODEL 170

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 170

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 170

AR68.30-P-4050G

Removing and installing paneling on A-pillar

6.3.96

MODEL 170

Removing and installing paneling on A-pillar

P68.30-0344-06

1 A-pillar paneling
2 Paneling at top of windshield
3 Top section of instrument panel
4 Large retaining clip
5 Small retaining clip

Removal

1

Remove paneling at top of windshield

AR68.30-P-4250G

2

Press paneling (1) out of retaining clips (3 each) with installation wedge (arrow) starting at top retaining clip

*110589035900

3

Remove paneling (1) toward middle of vehicle

Installation

4

Install retaining clips (4, 3 each) on A-pillar and attach electric wire

5

Position paneling (1) flush ontop section of instrument panel and press into retaining clips (4 and 5)

6

Install paneling at top of windshield

AR68.30-P-4250G

7

Lift rubber lip on A-pillar seal (arrows) over panels (1 and 2)

*115589035900

Removing and installing paneling on A-pillar
Removing and installing paneling on A-pillar

110 589 03 59 00

115 589 03 59 00

Long wedge

Mounting wedge

Referenced documents