ar6830p4050ak

Remove/install paneling on A-pillar

Type ar · topic 68.30 · version 0102 · 2006-08-08

Applies to: MODEL 169.0 /3, 245.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 169 (models 0**, 3**) · Series 245 (models 2**)

AR68.30-P-4050AK

Remove/install paneling on A-pillar

25.7.06

MODEL 169.0 /3, 245.2

Remove/install paneling on A-pillar

P68.30-3168-09

Shown with code (810) Sound system, left A-pillar paneling

1 A-pillar paneling

2 Edge guard

3 Clip

4 Lug

5 Bracket

6 Clamp

7 Electrical connector

8 Instrument panel

H4/34 Right A-pillar tweeter (with code (520) radio Audio 5 CD or with code (523) Audio 20 MB radio or with code (525) Audio 50 APS MB radio or with code (527) COMAND APS (with navigation) or with code (529) HIGH Class Japan or with code (532) MB power speaker system or with code (533) Front and rear speaker -without radio- or with code (534) Radio Audio 20 CD Japan or with code (810) Sound system)

H4/33 Left A-pillar tweeter
(with code (520) Radio Audio 5 CD or with code (523) Audio 20 MB radio or with code (525) Audio 50 APS MB radio or with code (527) COMAND APS (with navigation) or with code (529) HIGH Class Japan or with code or with code (532) MB power speaker system or with code (533) Front and rear speaker - without radio - or with code (534) Radio Audio 20 CD Japan or with code (810) Sound system)

Remove/install

Note on function reliability of windowbag

AH91.60-P-0693-01A

1

Open left and right front door and loosen edge guard (2) in area of A-pillar paneling (1)

Installation: Ensure that edge guard (2) is seated properly.

2

Slide A-pillar paneling (1) upward against stop

3

Move mounting wedge between A-pillar and A-pillar paneling (1) and unclip lugs (4) on A-pillar paneling (1) from top to bottom

Installation: Ensure that clip (3) is seated correctly in mount (5) and that lugs (4) are seated correctly in clips (6) of A-pillar paneling (1).

*110589035900

4

Pivot A-pillar paneling (1) upward toward inside and pull out of retaining clips (arrows) on instrument panel (8) upward

Installation: Ensure that A-pillar paneling (1) is seated correctly between retaining clips (arrows) and instrument panel (8)

5.1

Disconnect electrical connector (7)

On vehicles with code (520) Radio Audio 5 CD
or with code (523) Radio MB Audio 20
or with code (525) Radio MB Audio 50 APS
or with code (527) COMAND APS (with navigation)
or with code (529) HIGH Class Japan
or with code (532) MB power speaker system
or with code (533) Front and rear speaker -without radio-
or with code (534) Radio Audio 20 CD Japan
or with code (810) Sound system

6

Remove A-pillar paneling (1) from vehicle

7.1

Remove left A-pillar tweeter (H4/33) or right A-pillar tweeter (H4/34)

When replacing A-pillar paneling (1) on vehicles with code (520) Radio Audio 5 CD or with code (523) Audio 20 MB radio or with code (525) Audio 50 APS MB radio or with code (527) COMAND APS (with navigation) or with code (529) HIGH Class Japan or with code (532) MB power speaker system or with code (533) Front and rear speaker -without radio- or with code (534) Radio Audio 20 CD Japan or with code (810) Sound system

AR82.62-P-7830AK

8

Install in the reverse order

Remove/install paneling on A-pillar

Wedge tool

110 589 03 59 00

Referenced documents