Remove/install side wall lining

AR68.30-P-1450GM

Remove/install side wall lining

29.01.2019

Model

463.222/244/247/322/332/336/340

as of model year 2000 up to model year 2013

Station wagon, wheelbase 2400 mm

1

Edge guard

7

Grab handle screw

12

Bottom side wall paneling

2

Cover

8

Seat belt guide bracket

13

Top side wall paneling

4

Seat belt guide bracket cover

9

Seat belt guide bracket bolt

14

Clips

5

Grab handle

10

Expansion clips

H4/7h2

Left rear speaker

6

Cover lug

11

Seat belt guide

H4/8h2

Right rear speaker

15

Belt end fitting

X1/14

Left speaker/main wiring harness connector

X54/23

Left rear heated seats connector

16

Belt end fitting screw/bolt

X1/15

Right speaker/main wiring harness connector

X54/24

Right rear heated seats connector

 

Remove/install

1

Remove edge guard (1) at trim (2)

2

Remove stowage box

Model 463.222/244/247/322/332/336/340
as of model year 2000 up to model year 2013
with code V53 (Stowage box and double roller cover for luggage)Station wagon, wheelbase 2400 mm

AR68.72-P-0010GK

3

Remove paneling (2)

 Disconnect connector from left rear speaker (H4/7h2) and right rear speaker (H4/8h2).

4

Disconnect connector from ultrasonic reversing aid warning buzzer

Only for code (J44) Ultrasonic reversing aid

 Only for right trim (2).

5

Pry off cover lugs (6) at grab handle (5) and remove grab handle screws (7)


Carefully pry off cover lugs (6).
They may otherwise break.

6

Fold up seat belt guide bracket cover (4) at seat belt guide bracket (8) in rear and remove seat belt guide bracket screw (9)

 Unscrew bolt/nut from rear seat belt guide bracket

*BA91.40-P-1005-01C

7

Remove expansion clips (10)

8

Remove seat belt guide (11)

9

Remove front seat belt

Remove/install seat belt with emergency tensioning retractor
Model 463.222/244/247/322/332/336/340
as of model year 2010 up to model year 2013Station wagon, wheelbase 2400 mm

AR91.40-P-0630GM

 Only remove seat belt end fitting and seat belt guide bracket.

10

Unclip lower side wall trim (12) from upper side wall trim (13) and remove

 Mounting wedge

*110589035900

11

Remove clips (14) of upper side wall trim (13)

12

Remove rubber door seal in area of upper side wall trim (13)

13

Remove upper side wall trim (13) from window weatherstrip

 Mounting wedge

*110589035900

14

Remove seat belt end fitting screw (16) at seat belt end fitting (15) in rear

 Bolt on belt end fitting

*BA91.40-P-1001-01C

15

Disconnect connector of left speaker/MWH (X1/14) and connector of right speaker/MWH (X1/15)

16

Remove connector of left rear seat heating (X54/23) and connector of right rear seat heating (X54/24)

Only for code (H11) Rear bench seat heating.

17

Remove upper side wall trim (13)

18

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 463
up to model year 2019

Model 463
as of model year 2019

BA91.40-P-1001-01C

Bolt on belt end fitting

Nm

35

35

 Seat belts/emergency tensioning retractors

Number

Designation

Model 463
up to model year 2019

Model 463
as of model year 2019

BA91.40-P-1005-01C

Unscrew bolt/nut from rear seat belt guide bracket

Nm

35

35