Remove/install side wall lining · ar6830p1450gls · Mercedes-Benz WIS

AR68.30-P-1450GLS

Remove/install side wall lining

27.2.12

MODEL 461.331
with protection kit

1 Partition wall

2 Bolt

P68.30-3087-03

P68.30-3100-06

1 Partition wall

3 Wheelhouse paneling

4 Cover

5 Roof frame

6 Grab handle

7 Cover

8 Side wall lining

 	Remove/Install
1	Remove floor covering from load compartment intermediate bottom	 The load compartment intermediate bottom consists of two pieces. It is only necessary to remove it on one side where the side wall lining (8) is removed.
2	Unscrew bolts (2) in load compartment from dividing wall (1)		*BA68.30-P-1014-01B
		 Installation: Use new micro-encapuslated bolts or screw in old bolts with Loctite 243	*BR00.45-Z-1133-02A
3	Remove rear seat belt		AR91.40-P-0681GLC
4	Remove cover (4)
5	Remove grab handle (6)
6	Remove roof frame (5)
7	Remove wheelhouse paneling (3)		*BA68.30-P-1015-01B
		 Installation: Use new micro-encapuslated bolts or screw in old bolts with Loctite 243	*BR00.45-Z-1133-02A
8	Remove covers (7)
9	Unscrew bolts below covers (7)		*BA68.30-P-1010-01B
		 Installation: Use new micro-encapuslated bolts or screw in old bolts with Loctite 243	*BR00.45-Z-1133-02A
10	Remove side wall lining
11	Install in the reverse order

 Panelings, ornamental frames

Number	Designation		Model 461.331 with protective kit


BA68.30-P-1010-01B	Bolt, splinter guard to side wall	Nm	15
BA68.30-P-1014-01B	Bolt, partition wall	Nm	15
BA68.30-P-1015-01B	Screw, wheelhouse splinter guard	Nm	15

Repair materials

Number	Designation	Order number
BR00.45-Z-1133-02A	Loctite 243	A 613 989 09 71