ar6830l4490va

Remove/install paneling on C-pillar

Type ar · topic 68.30 · version 0101 · 2003-04-30

Applies to: MODEL 414.700

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 414 (models 700)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 414 (models 700)

AR68.30-L-4490VA

Remove/install paneling on C-pillar

12.7.01

MODEL 414.700

Remove/install paneling on C-pillar

L68.30-0005-06

1 C-pillar paneling

2 Edge guard

3 Cover

4 Guide point

5 Support

6 Retaining clamp

7 Clip

Remove/install

1

Pull off edge guard (2) on C-pillar in area of C-pillar paneling (1)

2

Unclip cover (3) from seat belt guide (4)

3

Detach seat belt guide (4) from C-pillar

*BA91.40-P-1009-01E

4

Remove support (5)

5

Unclip C-pillar paneling (1) using assembly wedge and remove

Pass the assembly wedge close up to the clip (7) and each of the retaining clamps (6).

Check condition of clip (7) and retaining clamps (6) and replace if necessary.

*110589035900

6

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Models
414.700

BA91.40-P-1009-01E

Bolt to rear seat belt guide

NM

35

Remove/install paneling on C-pillar

Assembly wedge

110 589 03 59 00