ar6830l4480va

Removing and installing side roof frame paneling

Type ar · topic 68.30 · version 0100 · 2003-03-13

Applies to: MODEL 414.700

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 414 (models 700)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.32 Roof lining — Series 414 (models 700)

AR68.30-L-4480VA

Removing and installing side roof frame paneling

19.7.01

MODEL 414.700

Removing and installing side roof frame paneling

L68.30-0009-06

1 Roof frame paneling

2 Edge guard

3 Bolt cover

4 Bolt

5 Grab handle

6 Support

7 Retaining clamp

8 Clip

Removing, installing

1

Remove paneling on B-pillar

Only top section of B-pillar paneling.

AR68.30-L-4700VA

2

Pull off edge guard (2) in area of roof frame paneling (1)

3

Open bolt covers (3), unscrew bolts (4) and remove grab handle (5)

4

Remove support (6)

5

Unclip roof frame paneling (1) using assembly wedge and remove

Pass the assembly wedge close up to the clip (8) and each of the retaining clamps (7). Check condition of clip (8) and retaining clamps (7) and replace if necessary.

*110589035900

6

Install in the reverse order

Removing and installing side roof frame paneling

Assembly wedge

110 589 03 59 00

Referenced documents