Shown with code ZU1 (Minibus) |
1 | Front headliner |
2 | Bolts |
3 | Stowage box/tray with sun visor |
4 | Bolts |
5 | Stowage box/tray |
6 | A-pillar trim panel |
7 | Left B-pillar trim panel |
8 | Grab handle |
9 | Right B-pillar trim panel |
10 | Caps |
E15/1 | Front dome lamp with switch |
D68.30-2422-06
| Notes on self-locking nuts and bolts | ||
| Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Unclip A-pillar trim panel (6) and pivot upward toward inside | Do not remove A-pillar trim panel (6) completely. | |
Installation: Ensure that edge guard is seated correctly in area of A-pillar paneling (6). | |||
Mounting wedge | |||
2 | Remove caps (10) | ||
3 | Unscrew bolts (2) and remove stowage box/tray with sun visor (3) | Bolt, stowage box/tray to bracket | |
4 | Unscrew bolts (4) and remove stowage box/tray (5) | Bolt, stowage box/tray to bracket | |
5 | Unclip dome lamp with front switch (E15/1) and pull out until electrical connector is accessible | Mounting wedge | |
6 | Disconnect electrical connector and remove dome lap from front switch (E15/1) | ||
7 | Remove left B-pillar paneling (7) |
| |
8 | Remove support rod (8) |
| |
Model 900 | |||
9 | Remove right B-pillar trim panel (9) |
| |
Model 900 | |||
10 | Unclip front headliner (1) and guide out of vehicle interior | Helper required. | |
Installation: Ensure that edge guard is seated correctly in area of front headliner (1). | |||
Mounting wedge | |||
| Check | ||
11 | Check retaining clips on front headliner (1) for damage. | for damage | |
| |||
Replace retaining clip. | |||
12 | Install in the reverse order |
110 589 03 59 00
Mounting wedge
Referenced documents
- ah0000n000101a Notes on self-locking nuts and bolts
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar6830d4700a Remove/install paneling on B-pillar
- ar6830d4700ca Remove/install paneling on B-pillar
- ar6830d4700ch Remove/install paneling on B-pillar
- ar6870d0303ca Remove/install support rod on B-pillar
- ar6870d0303ch Remove/install support rod on B-pillar