AR68.30-D-1450B | Remove/install side wall lining | 7.7.04 |
MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
Top side wall lining
D68.30-1123-09
2 Bolts
3 Bracket
4 Clamps
5 Bolts
9 Covering
10 Bolts
11 Side wall lining
6 Latch element
7 Rubber base
8 Bolts
| Remove/Install | ||
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and undeburred vehicle parts. Deburr replacement panels. | |
1 | Remove bench | ||
2 | Remove hanging cabinet | Longitudinal hanging cabinet | |
3 | Remove heat shield from boiler | ||
4 | Remove roller sun blind | On left center vent window | |
5 | Remove bed plate guide rail | Left guide rail | |
6 | Unscrew bolts (2) | ||
7 | Remove bracket (3) | ||
8 | Remove table compartment strip | ||
9 | Remove trim strip from left roof frame | ||
10 | Unclip clamps (4) from trim strip on roof frame | Mounting wedge | |
11 | Unscrew bolts (5). | ||
12 | Remove latch element (6) | ||
13 | Remove rubber base (7) | ||
14 | Unscrew bolts (8). | ||
15 | Remove cover (9) | ||
16 | Remove utensil insert | ||
17 | Unscrew bolts (10). | ||
18 | Remove side wall lining (11) | Installation: When replacing side wall lining (11), transfer hole intervals of clamps (4) to new side wall lining (11) and drill holes | |
19 | Remove glue residues | Installation: Mask cleaned gluing points on roof frame and bottom window cutout with suitable adhesive tape. | |
20 | Install in the reverse order |
Mounting wedge
110 589 03 59 00
Referenced documents
- ar6820d8310a Remove/install table compartment strip
- ar6830d4485a Remove/install roof frame trim strip
- ar6850d3400a Remove/install roller sun bind
- ar8660d0012a Remove/install heat shield on cooker
- ar8660d0022a Remove/install utensil insert
- ar8660d0051b Remove/install hanging cabinet
- ar9121d4000a Remove and install bench
- ar9175d7765a Remove/install guide rail for bed plate
- as0000z001701b Risk of injury caused by scraping or cutting body parts on sharp vehicle parts