Remove/install trim on sliding door entrance box

AR68.30-D-0018TSB

Remove/install trim on sliding door entrance box

07.09.2018

Model

907.6

except code V39 (Plastic floor for people mover)

except code VK8 (Floor covering, plastic)

Shown on model 907.6 with code LB9 (Illuminated exits), except code D50 (Full-width partition wall), except code D51 (Full-width partition wall with 1 window) and except code D64 (Partition with sliding door) on right side of vehicle

1

Cover

5

Screw

2

Exit light

6

Screw

3

Electrical connector

7

Rail

4

B-pillar paneling

8

Edge guard

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Full open relevant sliding door.

2

Unscrew screw/bolt (6).

3

Release strip (7) in area of trim (1).

Model 907.6 with code V43 (Wood floor) and except code D50 (Full-width partition wall) and except code D51 (Full-width partition wall with 1 window) and except code D64 (Partition with sliding door)

4

Release edge guard (8) in front lower area (arrow).

Model 907.6 except code D50 (Full-width partition wall) and except code D51 (Full-width partition wall with 1 window) and except code D64 (Partition with sliding door)

5

Unclip exit lamp (2), disconnect electrical connector (3) and remove exit lamp (2).

Model 907.6 with code LB9 (Illuminated exits)

6.1

Pull away B-pillar trim (4) in lower area, remove screw (5) and remove trim (1).

Model 907.6 except code D50 (Full-width partition wall) and except code D51 (Full-width partition wall with 1 window) and except code D64 (Partition with sliding door)

6.2

Unscrew screw (5) and remove trim (1).

Model 907.6 with code D50 (Full-width partition wall) and model 907.6 with code D51 (Full-width partition wall with 1 window) and model 907.6 with code D64 (Partition with sliding door)

7

Install in the reverse order.



Check

8

Perform function test of exit lamp (2).

Model 907.6 with code LB9 (Illuminated exits)