Remove/install center console

AR68.20-S-2000EA

Remove/install center console

18.04.2018

Model

447

with code FG0 (Deluxe center console with roller shutter door)

except code FF1 (Centre console with stowage compartment)

except code FF2 (Centre console with 1-DIN aperture)

Model

448

with code FG0 (Deluxe center console with roller shutter door)

except code FF1 (Centre console with stowage compartment)

except code FG6 (Center console with cooling compartment)

Modification notes

15.03.2018

Work procedure completely revised.

1

Center console

2

Cover

3

Screw

4

Cup holder

6

Bolts

9

Electrical connectors

Shown on model 447.8 with code ZK7 (MARCO POLO equipment line)

1

Center console

4

Cup holder

7

Operating unit

2

Cover

5

Insert

8

Electrical connector

3

Screw

6

Bolts

Shown on model 447.8 with code ZK7 (MARCO POLO equipment line)

1

Center console

11

Bolts

10

Insert

12

Bracket

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Remove left and right cover (2) at center console (1).

 Clip remover

*452589016300

3

Remove screw/bolts (3).

4

Open retractable cover of center console (1).

5

Remove cup holder (4).

6

Remove insert (5).

7

Remove screw/bolts (6).

8

Unclip operating unit (7) and pull backwards until electrical connector (8) is accessible.

Model 447 with code ZK7 (MARCO POLO equipment line)

 Clip remover

*452589016300

9

Disconnect electrical connector (8) and remove operating unit (7).

Model 447 with code ZK7 (MARCO POLO equipment line)

10

Slide center console (1) backward until electrical connectors (9) can be accessed.

11

Disconnect electrical connectors (9).

12

Remove center console (1) from vehicle.

13

Remove insert (10).

Model 447 with code ZK7 (MARCO POLO equipment line)
When replacing center console (1).

14

Remove screws (11) and remove bracket (12).

Model 447 with code ZK7 (MARCO POLO equipment line)
When replacing center console (1).

15

Drill bores in center console (1).

Model 447 with code ZK7 (MARCO POLO equipment line)
When replacing center console (1).

AR68.20-S-2000-06E

16

Install in the reverse order.



Check

17

Perform function test of electrical consumers in center console (1).