P68.20-3406-06
1 Front beverage holder
2 Bracket
3 Rubber insert
4 Bolts
5 Cover
6 Clips
7 Clips
P68.20-3418-01
8 Electrical connector
9 Electrical connector
A2/60 Cockpit Keyless Go antenna
R3 Front cigar lighter (with ashtray illumination)
P68.20-3407-11
| Remove | ||
1 | Remove bracket (2) | See Operator's Manual | |
2 | Remove rubber insert (3) | ||
3 | Remove bolts (4) | ||
4 | Unclip cover (5) from clips (6, 7) and remove upward | Long wedge | |
5 | Slightly pull center console toward outside (arrows A). | To prevent damaging center console! | |
6 | Raise front beverage holder (1) in rear area (arrow B), then remove toward rear | Installation: Clips (6, 7) should arrest audibly | |
7 | Disconnect electrical connector (8) from cockpit Keyless Go antenna (A2/60) | ||
8.1 | Disconnect electrical connector (9) from front cigar lighter (with ashtray illumination) (R3) | ||
| Install | ||
9 | Connect electrical connector (9) to front cigar lighter (with ashtray illumination) (R3) | ||
10 | Connect electrical connector (8) to Keyless Go cockpit antenna (A2/60) | ||
11 | First position front beverage holder (1) at front, then press downward at rear | Slightly pull center console (arrows A) toward outside to prevent damaging center console! | |
12 | Position cover (5) | ||
13 | Slightly pull center console toward outside (arrows A). | To prevent damaging center console! | |
14 | Clip on cover (5) | Ensure that clips (7) are seated correctly in center console | |
15 | Screw in bolts (4) | ||
16 | Insert rubber inserts (3) | ||
17 | Install bracket (2) | See Operator's Manual |
Long wedge
115 589 03 59 00