P68.20-4695-07
Shown on model 222 up to model year 2018 |
4 | Splash guard cap | 34 | Retaining tab | 35 | Trim piece |
Shown on model 222 up to model year 2018 |
4 | Splash guard cap |
35 | Trim piece |
36 | Stowage compartment |
P68.20-4696-01
Shown on model 222 up to model year 2018 |
35 | Trim piece |
36 | Stowage compartment |
P68.20-4697-01
P68.20-4698-07
Shown on model 222 up to model year 2018 |
35 | Trim piece | 36 | Stowage compartment |
| Remove | ||
1 | Open front stowage compartment cover | ||
2 | Open splash guard cap (4) | Model 217, 222 | |
3 | Press retaining tabs (34) downward (arrow direction A) and pull trim piece (35) toward rear (arrow direction B) | Pull trim piece (35) toward rear only until it is loose. | |
4 | Open stowage compartment (36) on instrument panel | ||
5 | Lift trim piece (35) and pull out toward rear | ||
| Install | ||
6 | Open stowage compartment (36) on instrument panel | ||
7 | Lay trim piece (35) down on center console | Trim element (35) has approx. 4 to 5 mm clearance to instrument panel (arrows C). | |
8 | Close stowage compartment (36) on instrument panel | ||
9 | Push trim piece (35) toward front (arrows E) | Simultaneously press trim piece in center (arrow D) downward. | |
10 | Close front stowage compartment cover | ||
| Check | ||
11 | Trim element (35) and stowage compartment cover must run in parallel |