Remove/install center console

AR68.20-P-2000W

Remove/install center console

17.2.11

 

Remove/install



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Set selector lever to position "0" or gearshift lever to neutral position

 Depending on vehicle equipment.

2

Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit

 KEYLESS-GO start/stop button only with code (889) Keyless-Go.

3

Unclip boot (2) from center console cover (3)

 Long wedge

*115589035900

4

Open armrest cover (4)

5

Unclip cover (5)

 Long wedge

*115589035900

6

Remove cup holder (8) and insertion element (9) from stowage compartment (10)

 Cup holder (8) only on vehicles with code (309) Cup holder.

7

Remove bolts (6)

Rechargeable drill / screwdriver

gotis://G_58.0_01.1

8

Unclip center console cover (3) from center console (1) and instrument panel (7) and lift until electrical connectors are accessible at the bottom of the center console cover (3)

9

Disconnect electrical connectors at bottom of center console cover (3) and remove center console cover (3)

 The number of electrical connectors depends on the equipment.

10

Pull stowage compartment (10) out of center console (1) toward front and remove

 Installation: Ensure that stowage compartment (10) is seated correctly in center console (1).

11

Remove insertion element (11)

12

Unscrew nuts (12)

Rechargeable drill / screwdriver

gotis://G_58.0_01.1

13

Unclip center console (1) in front area (arrows) on instrument panel (7) and lift until electrical connectors are accessible at bottom side of center console (1)

14

Disconnect electrical connectors at bottom of center console (1) and remove center console (1)

 The number of electrical connectors depends on the equipment.

15

Install in the reverse order