Remove/install center console

AR68.20-P-2000TX

Remove/install center console

12.04.2019

Model

219.3

Front center console

Shown on code (388) telephone "cell phone" UPCI system and code (525) MB Audio 50 APS radio

1

Front center console

6

Electrical connectors (for code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) California version or code (498) Japan version)

10

Electrical connectors

2

Bolts

7

Glasses compartment (for code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version)

11

Additional cross bridge

3

Stowage compartment

8

Electrical connectors (for code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version)

A2

Radio

4

Insertion element

9

Bolts

E13/3

Stowage compartment illumination

5

Cell phone holder (for code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version)

1

Front center console

 

Remove/install

1

Remove rear center console

AR68.20-P-2020TX

2

Remove cover on center console

AR68.20-P-2350TX

3

Bring selector lever into the rear-most position

4

Remove front ashtray housing from front center console (1)

AR68.20-P-2400TX

 Installation: Perform function check on the mechanical components of the ashtray housing; if necessary, loosen threaded connection of the front center console (1) and front center console (1) free of tension.

5

Remove trim from the front center console (1)

AR68.20-P-5169TX

6

Remove screws (2)

 Installation: Ensure that the front center console (1) is installed free of tension.

7

Remove additional cross bridge (11) from the front center console (1)

8

Open stowage compartment (3) and remove insertion element (4)

9

Unclip cell phone holder (5) by hand from the stowage compartment (3)

For vehicles with code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version

10

Unclip electrical connectors (6) from glasses compartment (7) and place cell phone holder (5) to one side

For vehicles with code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version

11

Unclip glasses compartment (7) from the stowage compartment (3) with a suitable screwdriver

For vehicles with code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version

12

Disconnect electrical connectors (8) and remove glasses compartment (7)

For vehicles with code (386) pre-installation for telephone "cell phone" UPCI system or code (388) telephone "cell phone" UPCI system or code (494) USA version or code (498) Japan version

13

Unclip stowage compartment illumination (E13/3) from the stowage compartment (3), disconnect electrical connector from the stowage compartment illumination (E13/3) and remove stowage compartment illumination (E13/3)

14

Remove screw/bolts (9)

 Installation: Ensure that the front center console (1) is installed free of tension.

15

Pull front center console (1) toward the rear until the electrical connectors (10) are accessible on the rear of the radio (A2) or COMAND operating, display and controller unit

Topical note

Notes on avoiding damage to optical fibers during repair work

AH82.60-P-0001-05AK

 Depending on equipment.

16

Disconnect Electrical connections (10)

Topical note

Notes on avoiding damage to optical fibers during repair work

AH82.60-P-0001-05AK

17

Remove front center console (1)

18

Install in the reverse order