Remove/install center console

AR68.20-P-2000MFA

Remove/install center console

16.01.2020

Model

118, 177, 247

Shown on model 177.0 with code PAC (Value Package)

1

Rear stowage compartment

3

Nuts

Shown on model 177.0 with code PAC (Value Package)

1

Rear stowage compartment

8

Center console

10

Catch hook

2

Rear cover

8

Center console

9

Guides

Shown on model 177.0

4

Bolts

6

Nut

5

Bracket

7

Bolts

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Open rear stowage compartment (1).

3.1

Release catch hooks (10), swivel the rear stowage compartment (1) out, and release and disconnect electrical connectors.

Model 118, 177, 247
with code PAC (Value Package)


Do not crush or kink or subject electric lines to tension.
This will otherwise result in damage to electric lines and can impair their function.

 The number of electrical connectors varies according to vehicle equipment.

 Long wedge

*115589035900

3.2

Release catch hooks (10) and swivel rear stowage compartment (1) out.

Model 118, 177, 247
except code PAC (Value Package)

 Long wedge

*115589035900

4

Remove rear stowage compartment (1).

5

Unclip rear cover (2) in the direction of the arrow (A).

6

Remove nuts (3).

7

Remove cover (8) from center console.

AR68.20-P-2350MFA

8

Remove screws (4) and remove bracket (5).

9

Remove nut (6).

10

Remove screws (7).

11

Pull out center console (8) toward the rear and remove carefully.


Do not crush or kink or subject electric lines to tension.
This will otherwise result in damage to electric lines and can impair their function.


Protect adjacent component parts against damage with suitable means.
The risk exists otherwise of damaging component parts.

 Installation: Guide guides (9) on left and right under floor covering.



Check

12

Check catch hooks of the rear cover (2) for damage.

If catch hooks are damaged,



replace rear cover (2).

13

Install in the reverse order.