Shown on model 461.332 |
1 | Side covers on center console |
2 | Upper center console cover |
3 | Floor-mounted shift |
P68.20-2800-11
P68.20-2801-09
Shown on model 461.332 |
4 | Center console ground connection body | X22/19 | Transmission tunnel transmission wiring harness connector | |
5 | Battery compartment ventilation | X29/9 | Center console connector 2 | |
6 | Bolt for center console | X29/13 | Center console connector 1 |
6 | Bolt for center console |
P68.20-2803-01
| Remove/install | ||
1 | Move selector lever to position "N" | ||
Danger ! | Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | |
2 | Disconnect battery ground line | ||
| Notes on battery | ||
On vehicles with 12 Volt and 24 Volt on-board electrical system, all ground lines must be disconnected for reasons of safety. | |||
3 | Remove battery | On vehicles with 12 volt and 24 volt on-board electrical system | |
MODEL 461.302/331/332/342/345 with ENGINE 612.966 | |||
4 | Move seat toward rear and remove side covers on center console (1) | Installation: Ensure that blower hoses are routed correctly. | |
5 | Remove main battery switch | Vehicles with code (E30) Battery main switch, 1-pin. | |
6 | Remove upper center console cover (2) | ||
7 | Disconnect electrical connectors at rear of cover | Only on vehicles with central locking and electrically adjustable outside mirrors. | |
8 | Remove floor shift (3) | Model 461 with transmission 722.6 | |
9 | Disconnect transmission tunnel transmission wiring harness connector (X22/19) | ||
10 | Disconnect center console ground connection on body (4) | ||
11 | Disconnect connector 2 for center console (X29/9) and connector 1 for center console (X29/13) | Connector 2 for center console (X29/9) and connector 1 for center console (X29/13) are screwed. | |
12 | Disconnect hose connections from battery compartment ventilation (5) | ||
13 | Remove airbag control unit | MODEL 461.302/304/305/332/333/334/340/342/343/344/345/346/392 | |
14 | Unscrew bolts on center console (6) | ||
15 | Remove center console | ||
16 | Install in the reverse order | ||
17 | Connect diagnostic system, read out fault memory and delete if necessary | ||
|
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ah5410p000101a Notes on battery
- ah5410p000101a
- ar2760p0900gl Remove/install floor selector
- ar5410p0003gl Disconnect/connect battery ground line
- ar5410p0005gl Remove/install battery
- ar9160p0615gl Remove/install airbag control unit
- as5410z000101a Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of