ar6820p2000e

Removing and installing center console

Type ar · topic 68.20 · version 0101 · 1997-04-24

Applies to: MODEL 202

Where it sits

Function group 3 Body › 68 Interior equipment › 68.20 Center console — Series 202

EinPAS 37 Interior equipment › 37.20 Center console › 37.20.30 Center console/armrest/trim/cover — Series 202

AR68.20-P-2000E

Removing and installing center console

23.6.93

MODEL 202

Removing and installing center console

P68.20-0015-09

1 Rear screws

2 Front screws

3 Center console

4 Dome (instrument panel)

5 Sliding plug connection

Removal, installation

1

Remove cover at gearshift lever

AR68.20-P-2310E

2

Remove ashtray housing at front of center console

AR68.20-P-2400E

3.1

Open lid above stowage compartment

Vehicles with front armrest (code 570)

4.1

Remove carpet section in stowage tray

Vehicles without front armrest

5

Unscrew screw (1) in stowage compartment

6

Unscrew screw (2)

7

Disconnect center console (3) at connection point to dome (4)

For this purpose lift center console (3) until the sliding plug connection (5) can be separated.

8

Remove center console (3)

When installing, attach sheet metal clip nuts onto console above propeller shaft tunnel and gearshift lever mount. Expose wiring to control switches

9

Reinstall in opposite order

Referenced documents