Remove/install center console

AR68.20-G-2000E

Remove/install center console

16.2.12

 

Remove/install

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground line from battery 1 (G1/1)

AR54.10-G-0003B



Notes on battery

All models

AH54.10-P-0001-01A

2

Remove hydraulic joystick (A22) and disconnect electrical connector

 Mark electrical connectors in relation to one another

3

Remove hydraulic control unit (A23) and disconnect electrical connectors

 Mark electrical connectors in relation to one another

4

Remove covering caps (5)

5

Unscrew nuts from parking brake valve (6)

6

Remove cover (4) and disconnect electrical connectors

 Mark electrical connectors in relation to one another

7

Remove parking brake valve (6) from center console (3)

 Do not disconnect air line connections from parking brake valve (6).

8

Remove 24V/12V voltage converter (T1) and disconnect electrical connector

 Mark electrical connectors in relation to one another

9

Remove GS sensor unit (A15)

AR26.60-G-0012E

10

Disconnect electrical connectors from cover (2)n

 Mark electrical connectors in relation to one another

11

Remove bracket (1) from center console (3)

12

Unscrew bolts (7) from floor panel

13

Remove center console (3)

 Lift center console (3) in rear area and carefully unthread electric subharness (8)

14

Install in the reverse order