P68.10-3274-04
1 Glove compartment
2 Bolts
3 Bolts
4 Electrical connector
| Remove | ||
1 | Remove cover below right instrument panel | ||
2 | Remove paneling from center console | ||
3 | Remove trim strip on instrument panel | ||
Danger! | Risk of fire and explosion caused by machining/treating magnesium components | Keep away from ignition sources and open flames. | |
4 | Unscrew bolts (2, 3) with battery-powered screwdriver | ||
| Notes on processing magnesium components | ||
5 | Remove glove compartment (1) from instrument panel until electrical connector (4) is accessible | Move glove compartment (1) out of center console in area of bolts (3). | |
6 | Disconnect electrical connector (4) and remove glove compartment (1) | ||
| Install | ||
7 | Connect electrical connector (4). | ||
8 | Insert glove compartment (1) into instrument panel | Insert glove compartment (1) into center console in area of bolts (3) | |
Danger! | Risk of fire and explosion caused by machining/treating magnesium components | Keep away from ignition sources and open flames. | |
9 | Tighten bolts (2) with battery-powered screwdriver | ||
| Notes on processing magnesium components | ||
10 | Adjust glove compartment (1) | ||
11 | Tighten bolts (3) with battery-powered screwdriver | ||
12 | Install trim strip on instrument panel | ||
13 | Install paneling on center console | ||
14 | Install cover below instrument panel on right |
Commercially available tools
Referenced documents
- ah6000p002301r Information on machining/treating magnesium components
- ar6810p1180tx Remove/install trim strip on instrument panel
- ar6810p1401tx Adjust glove compartment
- ar6810p1520tx Remove/install cover below instrument panel (right)
- ar6820p5169tx Remove/install center console paneling
- as6000z000601r Risk of fire and explosion caused by machining/treating magnesium components