AR68.10-P-1400GI | Remove/install glove compartment | 22.4.99 |
MODEL 163.136 /154 /172 #A as of 145273,
163.136 /154 /172 #X as of 708319,
163.113 /128 /157 /174 /175
P68.10-2330-06
1 Glove compartment lid
2 Screws
3 Glove compartment
4 Instrument panel
5 Spreading rivets
E13/1 Glove compartment lamp
| Remove/Install | ||
1 | Open glove compartment lid (1) | ||
2 | Unclip glove compartment lamp (E13/1) and disconnect connector | ||
3 | Unscrew bolt (2) | Torx bit set | |
4 | Remove upper spreading rivets (5) from glove compartment (3) | Press pressure pin approx. 4 mm upward and remove spreading rivet downward. | |
5 | Pull glove compartment (3) out of instrument panel (4) | ||
6 | Install in the reverse order | Align upper edge of glove compartment lid (1) in relation to instrument panel (4). |
Torx bit set
000 589 01 10 00