ar6720w2000a

Remove/install rear wall window

Type ar · topic 67.20 · version 0109 · 2014-01-24

Applies to: MODEL 374.502/523/551/554/557/584 with BODY 374.860 MODEL 374.602/651/655/682/685 with BODY 374.870 MODEL 374.607/691/695, 940.1/2/3, 942.1/3, 943.1/3, 944.0/1/2 with BODY 944.890 MODEL 375.1 with BODY 375.830 MODEL 375.1 with BODY 375.850 MODEL 375.3 with BODY 375.810 MODEL 375.3 with BODY 375.820 MODEL 375.4 with BODY 375.860 MODEL 950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890 MODEL 950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.899 MODEL 970, 972, 974, 975, 976 with BODY 972.899 MODEL 970.0/2/3, 972.

Where it sits

Function group 3 Body › 67 Windows › 67.20 Rear window — Series 374 (models 502, 523, 551, 554, 557, 584, 602, 607, 651, 655, 682, 685, 691, 695, 860, 870) · Series 375 (models 1**, 3**, 4**, 810, 820, 830, 850, 860) · Series 940 (models 1**, 2**, 3**, 890, 899) · Series 942 (models 1**, 3**) · Series 943 (models 1**, 3**) · Series 944 (models 0**, 1**, 2**, 890) · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 36 Visibility › 36.15 Glass pane/window › 36.15.42 Rear window — Series 374 (models 502, 523, 551, 554, 557, 584, 602, 607, 651, 655, 682, 685, 691, 695, 860, 870) · Series 375 (models 1**, 3**, 4**, 810, 820, 830, 850, 860) · Series 940 (models 1**, 2**, 3**, 890, 899) · Series 942 (models 1**, 3**) · Series 943 (models 1**, 3**) · Series 944 (models 0**, 1**, 2**, 890) · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

AR67.20-W-2000A

Remove/install rear wall window

10.01.2014

MODEL	374.502/523/551/554/557/584 with BODY 374.860
MODEL	374.602/651/655/682/685 with BODY 374.870
MODEL	374.607/691/695, 940.1/2/3, 942.1/3, 943.1/3, 944.0/1/2 with BODY 944.890
MODEL	375.1 with BODY 375.830
MODEL	375.1 with BODY 375.850
MODEL	375.3 with BODY 375.810
MODEL	375.3 with BODY 375.820
MODEL	375.4 with BODY 375.860
MODEL	950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890
MODEL	950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.899
MODEL	970, 972, 974, 975, 976 with BODY 972.899
MODEL	970.0/2/3, 972.0/3, 974.2, 975.0/2, 976.0/3 with BODY 972.890

Remove/install rear wall window

Shown on body 972.899

1	Seal
2	Window
3	Screwdriver
4	Cup suction tool

W67.20-0001-06

Remove/install rear wall window

W67.20-0002-09

Shown on body 972.899

1	Seal		6	Window imprint		A	Overlap area of pulling cord
2	Window		7	Rear panel
5	Pulling cord		8	Rear wall paneling

	Remove
1	Release bunk and fold down	Only on vehicles with bunk.
2	Install cup suction tool (4) on inside of window (2)
3	Pry sealing rubber lip (1) from vehicle interior over edge of window frame toward outside with screwdriver (3)	 Hold window (2) with cup suction tool (4).
4	Remove window (2) with cup suction tool (4)
5	Remove seal (1) from window (2)
	Install
6	Install seal (1) on edge of window (2)	 Pull long, angled sealing lip on gasket (1) up to passenger compartment. The window imprint (6) should be located at the bottom of the window (2) after installation.
7	Insert pull-in cord (5) all the way around the window (2) below the long rubber lip on the seal (1)	 The overlap area of the pulling cord (A) should be at the bottom and approx. 10 cm long.
8	Coat angled side of seal (1) with lubricant	Lubricant	*BR00.45-Z-1032-06A
9	Press window (2) uniformly against window frame from rear wall (7) with aid of helper with rubber seal (1) installed	 Allow ends of pull-in cord (5) to hang down into vehicle interior.
10	Uniformly pull ends of pull-in cord (5) into vehicle interior	 The long sealing rubber lip (1) should be positioned uniformly over the rear wall paneling (8) all the way around.
11	Check whether seal (1) is seated correctly, correct if necessary
12	Remove lubricant residues from window (2) and seal (1)
13	Fold up bunk and secure	Only on vehicles with bunk.

Repair materials

Number	Designation	Order number
BR00.45-Z-1032-06A	Lubricant	A 000 989 08 60