Remove/install rear-panel window

AR67.20-D-2001TS

Remove/install rear-panel window

27.05.2019

Model

907.1/2, 910.1

with code F35 (Cab rear wall with window)

Shown on model 907.2

1

Rear-wall window

2

Seal

3

Rear panel

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on removal/installation of windows

AH67.10-P-1000-02RT

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Remove the paneling from the top of the rear wall (3).

Model 907.2
with code F35 (Cab rear wall with window)

AR68.30-D-4751TSR

2

Release the sealing lip (arrow A) of the seal (2) in the cab from the rear wall (3) all around.

 The aid of a helper is required to hold the rear-wall window (1) from outside.

 Long wedge

*115589035900

3

Push the sealing lip (arrow A) of the seal (2) over the fold (arrow B) of the rear wall (3).


Carefully push the sealing lip (arrow A) over the fold (arrow B).
Otherwise the rear-wall window (1) could smash.

 Helper required.

4

Remove the rear-wall window (1) with seal (2) in the direction of the vehicle exterior.

 Helper required.

5

Remove the seal (2) from the rear-wall window (1).



Install

6

Attach the seal (2) to the rear-wall window (1).


Ensure that the seal (2) is installed in the correct position and is seated correctly.
This prevents the seal (2) from being damaged when the rear-wall window (1) is installed.

7

Insert the pulling cord in the groove of the seal (2).

 Commercially available devices/tools
Cord inserter

8

Coat the seal (2) and fold (arrow B) of the rear wall (3) with lubricating paste.

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

*BR00.45-Z-1002-06A

9

Place the rear-wall window (1) with seal (2) on the rear wall cutout (3) from the outside and align.

 Helper required.

10

Using the pulling cord, pull the sealing lip (arrow A) of the seal (2) over the fold (arrow B) on the rear wall (3).


Carefully pull the sealing lip (arrow A) over the fold (arrow B).
Otherwise the rear-wall window (1) could smash.


Carefully press on the rear-wall window (1).
Otherwise the rear-wall window (1) could smash.

 Gently press on the rear-wall window (1) here. Helper required.

 Commercially available devices/tools
Cord inserter

11

From outside, press on the seal (2) on the rear wall (3) over the entire circumference of the rear-wall window (1).

 Make sure that the seal (2) is seated correctly.



Clean

12

Clean the rear-wall window (1), rear wall (3) and seal (2).

13

Install the paneling on the top of the rear wall (3).

Model 907.2
with code F35 (Cab rear wall with window)

AR68.30-D-4751TSR

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

A 000 989 01 60