AR65.20-W-1006-06A | Remove inner channel from roof member | ||
Danger! | Risk of explosion from aluminum grinding dust, risk of injury to respiratory system from inhaling dust | Wear protective respiratory mask, protective gloves and safety glasses. Use suitable, grounded vacuum cleaner |
W65.20-1024-12
Illustrated on right side of cab
1 Drill out rivet nuts located in area of repair and reinstall after completing repair.
2 Cut out inner channel (1) of roof member (2).
Cut out inner channel only up to half of insert length.
3 Cut inner channel out of roof member of repair element.
Cut out inner channel only up to half of insert length.
Referenced documents
- as6000z000701n Risk of explosion from aluminum grinding dust, risk of injury to respiratory system from inhaling dust