P65.20-2835-09
1 | Expose spot welds on bottom side roof frame (2) and cut out (areas A, B and C). |
Cut out spot welds on bottom side roof frame (2) through 2 pane thicknesses (areas A1 and B1). |
2 | Remove upper side roof frame (1) and lower side roof frame (2). |
3 | Sand down mating surfaces to bare metal in cross-hatched areas. |
Sand down spot weld flanges to bare metal on both sides. |
4 | Remove grinding dust and drill chips. |
5 | Coat insides of spot weld flanges with zinc dust paint. |
P65.20-2836-12