ar6510s100002ca

Separate center roof paneling

Type ar · topic 65.10 · version 0101 · 2013-06-12

Applies to: MODEL 415.603 with CODE W27 (Fixed window, rear left) with CODE W28 (Fixed window at rear right) without CODE DL2 (Ladder flap) MODEL 415.605 with CODE W27 (Fixed window, rear left) with CODE W28 (Fixed window at rear right) MODEL 415.7

Where it sits

Function group 3 Body › 65 Roof › 65.10 Roof paneling — Series 415 (models 603, 605, 7**)

EinPAS 35 Body/frame/detachable parts › 35.39 Roof › 35.39.30 roof paneling/roof frame — Series 415 (models 603, 605, 7**)

AR65.10-S-1000-02CA

Separate center roof paneling

MODEL

415.603

with CODE W27 (Fixed window, rear left)

with CODE W28 (Fixed window at rear right)

without CODE DL2 (Ladder flap)

MODEL

415.605

with CODE W27 (Fixed window, rear left)

with CODE W28 (Fixed window at rear right)

MODEL

415.7

Separate center roof paneling

S65.10-4524-09

1

Expose spot welds on center roof paneling (1) and cut out (areas A and B).

Separate center roof paneling

S65.10-4528-09

2

Expose and cut out spot welds on center roof paneling (1) (areas C and D).

Separate center roof paneling

3

Heat center roof paneling (1) in crosshatched areas.


Cross-hatched areas are bonded.


4

Remove damaged center roof paneling (1).

S65.10-4529-06

Separate center roof paneling

S65.10-4530-09

5

Cut back remaining adhesive on reinforcements.

6

Grind mating surfaces down to bare metal in the cross-hatched inner C-pillar side wall .

Sand down spot weld flanges to bare metal on both sides.

7

Remove shavings and drill chips.

8

Coat insides of spot weld flanges with zinc dust paint.