MODEL | 207.3 |
1 | Apply sealant to foam parts (arrows). |
P65.10-3527-05
2 | Apply 2-component adhesive in crosshatched areas (area F). |
Observe pretreatment of bonding surfaces. Refer to the manufacturer's information for the curing and working times of 2-component adhesive. |
P65.10-3526-05
3 | Install center roof paneling and side roof paneling (1) with spacer blocks and fit. |
4 | Check and adjust gap dimensions. |
5 | Fix side roof paneling in place. |
6 | Remove spacers and center roof paneling. |
7 | Side roof paneling (1) (areas G and H). |
P65.10-3528-05
8 | Side roof paneling (1) (areas I1 and I2). |
Perform inert gas welding in intervals, allow to cool down in between to reduce heat distortion. |
9 | Grind inert gas welds on side roof paneling (1) down flat (areas I1 and I2). |
10 | Clean welds on side roof paneling (1). |
11 | Solder surfaces on side roof paneling (1) in areas I1 and I2 with body solder and smooth. |
12 | Remove grinding and drill shavings using wet/dry vacuum cleaner. |
P65.10-3529-05