AR65.10-D-5702-01D | Remove roof paneling | ||
Danger! | Risk of injury from slipping when clamping the blade in the multicutter and from glass splinters when cutting out cemented windows | Always interrupt air supply when inserting or removing blade. Wear protective gloves and eye protection. |
Cutting blade
124 589 21 63 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1012-04A | Cutting knife 109A, Firma Fein GmbH D-70176 Stuttgart | |
WH58.30-Z-1003-20A | Multicutter |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D65.10-1103-09
1 Drill out rivets (1) on left and right.
2 Expose antenna cable (2).
3 Cut from inside and outside with cutting blade along dotted line (3).
4 Separate roof paneling (4) along dotted line (5) with body saw.
Area A: approx. 40 mm
5 Remove roof paneling (4).
D65.10-1104-06
6 Cut out remaining strips (6) with cutting blade.
At points marked with arrows.
7 Remove remaining strips (6) from adjacent channels (7).
If necessary, pry out with suitable tool.
D65.10-1106-09
8 Cut glue out of adjacent channels (7) with cutting blade
9 Cut glue off of body flange (8) with 109A cutting blade.
10 Vacuum glue area with wet/dry vacuum cleaner.
Referenced documents
- as6700z000101a Risk of injury caused by slipping when inserting blade in the multicutter and byglass splinters when cutting out bonded windows