D65.10-1310-09
1 Drill out rivet (1).
2 Mask off adjacent paint surfaces on cab as well as profile (4)
3 Cut roof paneling (2) along dotted lines (3) from inside and outside.
Select cutting depth as low as possible Otherwise the inner components can be damaged.
Dimension:
a = 40 mm
4 Remove roof paneling (2).
D65.10-1311-06
5 Cut remaining strips (6) out of adjacent profiles (4).
6 Separate remaining piece (5) from cab and front corner pillars.
7 Remove remaining adhesive from cab, front corner pillars and adjacent profiles (4).
Do not leave more than 0.2 mm of old adhesive.