Series
en
ar6430w570507a
Prepare connection points for bottom section of outer corner pillar paneling
Type ar · topic 64.30 · version 0103 · 2006-10-31
Applies to: BODY 375.810 in MODEL 375.3 with CODE (F07) S-cab (short) BODY 375.830 in MODEL 375.1 with CODE (F07) S-cab (short) BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (F07) S-cab (short) BODY 972.899 in MODEL 970, 972, 974, 975, 976 with CODE (F07) S-cab (short)
Where it sits
Function group 3 Body › 64 Rear wall and rear end › 64.30 Corner paneling — Series 375 (models 1**, 3**, 810, 830) · Series 940 (models 899) · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976
EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — Series 375 (models 1**, 3**, 810, 830) · Series 940 (models 899) · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976
EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.45 column — Series 375 (models 1**, 3**, 810, 830) · Series 940 (models 899) · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976
AR64.30-W-5705-07A
Prepare connection points for bottom section of outer corner pillar paneling
Commercially available tools
Number
Designation
WH58.30-Z-1003-02A
Clamping pliers
WH58.30-Z-1010-02A
Sheet metal crimping shears
WH58.30-Z-1031-02A
C-clamp
WH58.30-Z-1001-03A
Round wire brush, braided, dia. 70 mm
WH58.30-Z-1021-04A
Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm)
WH58.30-Z-1024-04A
Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)
WH58.30-Z-1001-40A
Tarp (fire-resistant)
WE58.40-Z-1001-03A
Drill (electric/pneumatic)
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
WE58.40-Z-1004-03A
Body saw (electric/pneumatic)
WE58.40-Z-1005-03A
Wet/dry vacuum cleaner
Number
Designation
Order number
BR00.45-Z-1001-07A
Zinc dust paint suitable for spot welding
A 000 986 34 42
1 Fit bottom section of outer corner pillar paneling and fasten with clamping pliers.
2 Mark crimping area and remove bottom section of outer corner pillar paneling.
3 Cut crimping area to size in areas A to C.
4 Crimp crimping area B.
5 Grind connection surfaces down to bare metal on both sides.
6 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint.
