ar6430s573003s

Weld in outer center corner paneling

Type ar · topic 64.30 · version 0105 · 2010-03-15

Applies to: MODEL 636, 639.601 /603 /605 /701 /703 /705 /711 /713 /811 /813 /815

Where it sits

Function group 3 Body › 64 Rear wall and rear end › 64.30 Corner paneling — Series 636 · Series 639 (models 601, 603, 605, 701, 703, 705, 711, 713, 811, 813, 815)

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.30 Rear panel/rear end — Series 636 · Series 639 (models 601, 603, 605, 701, 703, 705, 711, 713, 811, 813, 815)

AR64.30-S-5730-03S

Weld in outer center corner paneling

Repair materials

Number

Designation

Order number

BR00.45-Z-1041-01A

Seam sealant, sprayable 310 ml

A 002 989 84 20

BR00.45-Z-1003-01A

Sealant, white, 310 ml, DB supply specification 6069.20

A 001 989 63 20

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Weld in outer center corner paneling

N64.30-2091-06

1 Install outer center corner paneling, adapt and then fasten in place using straightening tool and clamping pliers.

2 Outer center corner paneling (areas A and C).

3 Drill holes with Ø 7 mm (area B).

4 Outer center corner paneling (area B).

5 Remove straightening tool.

6 Complete outer center corner paneling (area A).

7 Resurface outer center corner paneling (area B).

8 Level outer center corner paneling point of resistance
(area A).

Weld in outer center corner paneling

N64.30-2095-09

9 Lower reinforcement and inner center corner paneling (area F).

10 Remove straightening bracket set.

11 Level out lower reinforcement and inner center corner paneling points of resistance (area F).